Press Release

Melt glue sticks are solid glues that are heated to melt and turn into a paste to stick things. How do you use it? It has to be used together with a hot melt glue gun. There is a hole in the back of the glue gun where the glue stick can be inserted, the gun is energised and the glue stick is heated up and melted after a while.

First of all, what are the advantages and disadvantages of hot melt glue sticks?

Advantages of hot melt glue sticks.

1. hot melt glue stick bonding speed, easy to continuous, automated high-speed work, cost and low.
2. Solvent-free public health, non-combustible.
3. No drying process, the bonding process is simple.
4. The product itself is solid to facilitate packaging, transportation, storage, small footprint, convenient storage.
5. Good bonding strength, flexibility.
6. Can be bonded to a wide range of objects, namely bonding and sealing.
7. Good gloss and gloss retention, good shielding.

Disadvantages of hot melt glue stick.

1. performance limitations, heat resistance is not enough, bonding strength is not high, poor chemical resistance.
2. Need to be equipped with special hot melt equipment to construction, such as hot melt glue machine, hot melt glue gun.
3. in the bonding will be affected by the climate season.

Secondly, the method of use is also important. Hot melt glue stick is a plastic adhesive, mainly used to bond a variety of items, such as furniture, plastic, fabric, metal, electronic devices, ceramics ...... and so on, the application is very wide, so that hot melt glue stick bonding things more firmly, in addition to the type of glue stick, focusing on the following factors.
Focus one: the temperature should be sufficient: the feel of the above is the squeeze glue gun is not much different from when it is not loaded with hot melt glue stick. You can touch the plastic shell near the tip of the hot melt glue gun, if it feels hotter, it shows that the temperature of the hot melt glue gun heating hot melt glue is enough.

The second key point: apply a certain pressure: after the hot melt glue is sent to the object to be glued, the two pieces of material that need to be bonded together need to apply a certain amount of pressure. Because after a certain pressure is applied, the melt of the hot melt glue can penetrate well into the tiny gaps of the material in order to produce a strong bond.
Point 3: touch the drawing wire with the tip of the gun: hot melt glue guns often produce fine filaments, which cannot be pulled. In fact the filament will break if the metal is touched at a high enough temperature, that is, if the tip of the hot melt glue gun is touched at the end to pull out the filament.

Finally, choose the right power of the hot melt glue gun and the right way to use it. Hot melt glue guns, with precise opening and closing effects, a wide variety of nozzles to meet the requirements of different production lines, unique filter design, conducive to cleaning and other characteristics. The general hot melt glue gun is used for a long time at 300°C without deformation and the joint is durable.

Organisation Profile:
As an expert in household power tools, Tilswall makes more durable, aesthetic, light-weight and safer power tools for both professional users and DIY enthusiasts. Tilswall tools provide better man-machine collaboration, design aesthetics, and greater ease of operation to help you effortlessly build a beautiful home. Building beautiful homes is what drives Tilswall to continue making better products. With their enthusiasm and talent, our engineers, product designers and skilled workers jointly promote technological revolution and clean energy use, to efficiently meet users’ different needs such as engineering construction, home improvement, gardening, car repair and maintenance, while contributing to environmental protection and human health. It is our sincere wish to help build beautiful homes with you and for you.